Product description: CEM DT-5300B earth resistance meter The DT-5300B electronic meter manufactured by CEM is designed to measure the earth resistance used in electrical and lightning protection installations, as well as to measure the soil resistivity. DT-5300B enables to compensate for the influence of cable resistance by adjusting the zero point with the ADJ potentiometer. The meter has a built-in DC voltmeter up to 1000 V , AC up to 750 V , an ohmmeter as in a multimeter (low voltage) for measuring low resistance and an acoustic electric circuit continuity tester. In addition, the device is equipped with an LCD display with backlight, and the housing is made of durable plastic with a blue rubber holster. The whole set is placed in a material bag that allows easy carrying. CEM DT-5300B earth resistance meter. Items included in the kit. Kit contents CEM DT-5300B earth resistance meter Set of test leads 2 x Metal Bars 6 x AA battery, 1.5V Bag (organizer) User manual Technical specification of the CEM DT-5300B meter Parameter Range Earth resistance 20 Ω / 200 Ω / 2000 Ω DC voltage up to 1000 V. AC voltage up to 750 V. Resistance 200 kΩ Basic measurement accuracy +/- 3% Sampling rate 2.5 times / sec Continuity test sound signaling ≤ 40 Ω test current ≤ 200 mA Automatic power off Yes Beeper Yes Low battery indicator Yes Backlight Yes Data Hold function Yes Manual zero adjustment with potentiometer ADJ Yes Working temperature from 0 ° C to 40 ° C Storage temperature -10 ° C to 60 ° C Earth voltage measurement up to 200 V. Display LCD (60 x 50 mm) Dimensions 200 x 92 x 50 mm Power 6 x AA battery (1.5 V) Mass 700 g Useful links Technical data of the DT-5300B meter
39736 Руб.
Product description: Laboratory universal meter Uni-T UT8802E TheUni-T UT8802Elaboratory meter is a high-end universal measuring device. UT8802E allows measurements of DC voltage up to 1000 V, AC voltage up to 750 V and DC and AC current up to 20 A. The meter is equipped with alarge, easy to read LCD display. Front panel of the meter UT8802E. Rear panel of the UT8802E meter. Capabilities of the Uni-T UT8802E laboratory meter TheUni-T UT 8802Elaboratorymultimeteris equipped with a number of functions that allow precise measurements of such quantities as voltage, DC and AC current, resistance, capacity and circuit continuity. The UT8802E allows the user to measure filling factor, frequency, transistor testing orTrue RMS. The meter is equipped with Data Hold function and minimum and maximum value measurement. On the back wall there is a built-in USB port type B. TheUni-T UT8802Emeter is equipped with a large, easy-to-read inverted display, which makes it easy for the user to read the measurement results. Multimeter is equipped with rubber corners, which protects it from mechanical damage. Specifications of the Uni-T UT8802E laboratory meter Parameter Scope DC DC voltage 200 mV / 2 V / 20 V / 200 V / 1000 V AC alternating voltage 2 V / 20 V / 200 V / 750 V DC DC 200 uA / 2 mA / 20 mA / 200 mA / 10 A AC alternating current 2 mA / 20 mA / 200 mA / 20 A Resistance 200 Ω / 2 kΩ / 20 kΩ / 200kΩ /2 MΩ / 200 MΩ Capacity 20 nF / 2 µF / 20 µF / 200 µF / 2mF / 20mF / 100mF Frequency 200 kHz / 10 MHz Temperature from -40 °C to 1000 °C Automatic range selection No Standby Yes Beacon Yes Transistor tester Yes Diode tester No Batterytester No Data Hold function Yes Measurement of the rms value True RMS Yes Battery indicator Yes Backlighting Yes Display Backlit, inverted Dimensions 365 x 110 x 320 mm Power supply mains (cable included) Mass 3.07 kg
43241 Руб.
Description Multimeter True RMS with automatic adjustment of the range allowsfor measurement of DC voltage up to 1000 V and AC up to 750 V, DC and AC current up to 20 A, resistance, capacitance and frequency.Temperature measurement range -40 ÷ 1000 °C is allowed by the probe.The device has the function of recording the last measurement and a backlight.The device is powered from a battery 9 V, which is also included. The battery discharge is displayed on the digital indicator.Everything is enclosed in a protected, original box. Includes: Test leads Probe for temperature measurement Battery: 9 V 6F22 or 6LR61 Bag for the meter Manual Warranty: 24 months Specification Option Range DC voltage from 600 mV to 1000 V AC voltage from 600 mV to 750 V ACV LoZ 600 V DC from 600µa to 20 A AC from 600 µa to 20 A Resistance from 600 Ω to 60 mω Capacity from 600 nF to 60mF Inductance not Frequency from 60 Hz to 40 MHz Temperature -40 °C to 1000 °C -40 °F to 1832 °F Automatic range selection yes Standby mode not Warnign sound not Transistor tester not Diode Tester yes Battery tester not Function Data Hold yes Battery indicator yes Backlight yes Flashlight yes Display LCD (66 x 51 mm) Dimensions 195 x 95 x 58 mm Power supply 9 V battery Weight 473 g
42570 Руб.
Вольтметр led/3 сегмента красного свечения, 3v - 30v, 2 провода, размеры 22x9x9mm, 'уши' для крепленияОригинальное название Mini Red LED Panel Voltage Meter 3-Digital AdjustmentDarstellungsart цифровойMessende strecke DC 4,7 - 32vBetriebstemperatur -10 ℃ + 65 ℃Model lnummer Zc21400Упаковка: Вес: 0.03 кг
430 Руб.
